Flexible tile adhesive with cement-based nanoparticles and special silicas for bonding floor and wall tiles inside and outside buildings, including swimming pools and balconies.

Features

• flexible
• fine-grained
• frost-resistant
• thixotropic
• good flow under the plate

Application

• gluing stoneware tiles, also large-format and other types of terracotta, ceramic, wall, clinker and floor tiles, both to rigid substrates and susceptible to deformation, inside - and in the case of frost-resistant tiles - outside the building in
• gluing tiles on difficult surfaces, on balconies and terraces, in wet rooms (bathrooms, laundries, kitchens)
• for cement and anhydrite screeds, also with underfloor heating
• fine grain <0.3 mm and special polymers with nanoparticles contribute to increasing the comfort of work compared to traditional products
• possible adjustment of the water depending on the preferences of the contractor and the place of use (floor or wall)

Technical data

• grain size 0.3 mm
• C2TE classification (according to EN 12004 + A1)
• shelf life after mixing with water: about 3 hours (at a temperature of +20 C)
• time for laying tiles after applying the adhesive to the substrate up to 30 minutes
• correction time up to 20 minutes
• possibility of walking on the finished cladding after about 12 hours
• grouting possible after 48 hours
• layer thickness from 2 to 15 mm
• average consumption per 1 m ² about 4.5 kg
• capacity for an average consumption of about 5.5 m ² per package
• The mixing ratio with water is about 8.5 liters in water for 25 kg of dry mix
• adhesion ≥ 1.0 N / mm
• soluble chromium VI content ≤ 0.0002%